How to clean and prevent mold on the bathroom ceiling

  • The reason why you should put bay leaves under your pillow
  • The way to use vinegar to leave your tires clean

The bathrooms they are a haven for mold and mildew. Dark, damp spaces are the perfect breeding ground, so you’ll often find it growing in bathtub crevices, shower surrounds, and even under the sink. Sometimes mold can even show up on your bathroom ceiling, making it easy to miss but hard to reach. Fortunately, tackling the fungus and preventing it from coming back is possible with these homemade tricks. Take note!

Addressing the growing fungus is feasible with these products. Be careful with the solution you are going to use for cleaning, we recommend you try it in an inconspicuous part of your ceiling to make sure you won’t damage the paint. You never want to wait to find out that the cleaner you’re using will stain or warp the paint until you’ve covered the entire ceiling with it.

What you will need:

  • spray bottle
  • eye protection
  • Face mask
  • Stepladder
  • Extendable cleaning brush or scrubber
  • microfiber cloths
  • Borax
  • White vinegar

How to clean mold on bathroom ceiling

  1. Mix your cleaning solution. Combine 2 teaspoons of borax with 1/2 cup of white vinegar. Once your solution is mixed, transfer it to a spray bottle for easy application. Note: If you opt for a store-bought cleaner, you should skip this step, as you never want to mix cleaning solutions, even if one is homemade.
  2. Put on your safety gear. It’s important to wear protective gear while cleaning your roof. You’ll want to make sure your eyes are covered and you’re wearing a face mask to minimize the amount of chemicals and mold you’re breathing in. If possible, open a window or turn on the bathroom vent as well.
  3. Spray the mold with your solution. Stand on a ladder to reach the ceiling and spray your cleaning solution where you can see mold and liberally around the outskirts of areas where mold appears. Once your roof is saturated, let the solution sit for 30 minutes.
  4. Scrub the ceiling. Using small circular motions, rub the ceiling from left to right. Once you’ve gone over the entire area, rinse and take a look at your work. If you can still see traces of the mold, even in small amounts, you’ll want to repeat steps 3 and 4.
  5. Clean the roof. After all the cleaning is done, use water and a microfiber cloth to clean the surface. You may need to do more than one pass to ensure that you have removed all of the remaining cleaning solution from the ceiling. Work as you would when scrubbing and wipe from left to right in small circular motions.
  6. Pat it dry. Moisture is the enemy when it comes to fighting mold, so you’ll want to use a dry microfiber cloth to wipe up any excess water that was left behind when it was rinsed. It’s also a good idea to leave a window open and the fan on to help speed up the drying process.

How to prevent mold on the bathroom ceiling

Unfortunately, you will never be able to remove moisture from your bathroom, especially if you like to take long hot showers from time to time. Fights future mold growth limiting the amount of moisture that remains in the air Always shower with the bathroom vent on, and remember to open a window when you leave.

Did you find this home hack interesting and did you learn a little more about cleaning and caring for your home without investing a lot of money? Like this ‘hack’, there is another type of utility that you will like. We invite you to get to know them and put them into practice. To do this, you just have to enter the following link for more home tricks in mag, and ready. You dare?